This is a communication device tester that runs on a PC and works with Modbus compatible devices.
AVReporter Modbus Communication Tester is a necessary test equipment to ensure energy management software works effectively with the devices that measure energy flowing through the network. It is able to connect to any Modbus TC/IP or RTU compatible measurement device. These devices will help read their quantities flowing through the network easily on our PC. The test software will be able to connect to Modbus compatible PLCs and Data concentrators in addition. This unit is used for verifying values before energy management system goes live. These can be used to create the customized driver for an Energy Management Software. This tool is able to connect to measurement devices from different manufacturers. It is, for example, compatible with Siemens, Janitza, Schneider Electric, ABB etc. Electricity, heat, water, sewage, solar energy measurements are all supported.
The real-time measurements could be logged in typically CSV format. Multiple register values could be read and logged at the same time. This tool is compatible with most of the common register types available, such as unsigned integer 16 or 32 bit, Float32, BCD, Digital bits. Single and multiple register formats are supported for Modbus TCP/IP and RTU. The interface registers could be masked suitably so that you could test control logic most often for PLC testing. If you are into energy measurements using software from this company, you need tools for testing the devices used for energy monitoring. This tool will be useful in testing such tool. This is a very good product.